The deliberate emphasis on simplicity
of operation has resulted in an easily serviceable design which over the
years has proven to be reliable and durable.
SWING
GRIPPER
Swing Gripper mechanism ensure dot
to dot registration of even thin stocks at all speeds. The operator can
do the make ready operation at low speed and the registration will hold
good even when the press is running at high speed. Moreover, Swing Gripper
also gives extra time for proper registration.
SIDE
LAY
Machine is equipped with Both Side
bearing side lay to get 100% registration. If any sheet is mis-fed even
for an inch it reaches the front lay and its proper feeding is ensured.
FEEDER
The unique stream feeding system is
employed in machine to ensure safe and accurate feeding.
INKING
UNIT
The 20 Rollers inking unit distributes
ink evenly for the most demanding Printing works. Oscillating & Rider Rollers
are copper coated, controlled by ink screw & due to M.S. Plate leakage
of ink is not possible.
MOTORISED
DAMPENING SYSTEM
Motorised dampening system provided
to get fresh water in duct round the clock. Precision water feeding allow
full control of water distribution with the press of a button.
Swing
Gripper Models
» D.C. Drive
» Taper Table
» Hardened & Grounded Gears
» Motorised Pile Table
» Centralised Lubrication with Timer
» Photocell & Double Sheet Detector
» Easy Adjustment of Gripper
» Finger Tip Controls
» Print with Nylo Master Facility
Details
Prakash
1620
Prakash
1925
Prakash
1928
Prakash
2030
Sheet
Size (max.)
15.5"
x 20"
19"
x 25.5"
19"
x 29"
20.5"x30.5"
Sheet Size (min.)
9" x 11"
9" x 11"
9" x 11"
12"x12"
Printing Area (max.)
15" x 20"
18.5" x 25"
18.5" x 28"
20"x30"
Gripper Margin on Paper
8 mm
8 mm
8 mm
8mm
Gripper Margin on Plate
1.25 mm
1.25 mm
1.25 mm
1.25mm
Plate Thickness
0.4 mm
0.4 mm
0.4 mm
0.4mm
Plate Size
17" x 21"
21" x 26"
21" x 29"
22"x32"
Blanket Thickness
1.9mm(4 Ply)
1.9mm(4 Ply)
1.9mm(4 Ply)
1.9mm(4
Ply)
Pile Height Feeder
30
35
35
35
Pile Height Delivery
16
20
20
20
Stock Thickness
30 gsm to 350 gsm
30 gsm to 350 gsm
30 gsm to 350 gsm
30
gsm to 350 gsm
Inking Roller
20
20
20
20
Dampening Roller
5
5
5
5
Main Drive Motor
2 HP
3 HP
3 HP
3
HP
Compressor Pump Motor
2 HP
2 HP
2 HP
2HP
Speed
8000 IPH
8000 IPH
8000 IPH
7000
IPH
Machine Dimensions
66" x 42" x 60"
94" x 53" x 65"
94" x 56" x 65"
95"x
65" x 70"
Machine Weight
2000
Kgs. (approx)
2300 Kgs. (approx)
2500
Kgs. (approx)
3000
Kgs. (approx)
Note :
Printing speed depends upon kind, condition
and thickness of stock, type of inks used, desired printing quality
and other operating conditions.
Illustration/Specification are not binding and
are subject to change without notice due to our continous R & D
effort for Improvements / Modifications.
